Ottoman refresh…

The hubs and I made ottomans a few years ago for in front of our couches. I originally upholstered them but have made slipcovers to change their look several times. So I thought would do a little tutorial on my process. I always use curtain panels for the fabric. They tend to be cheaper than buying yard goods and sometimes wider than fabric from the bolt!

For this project I bought the panels at Hobby Lobby on sale for 50%. So I recovered two ottomans for under $40!

The first step is to lay the panel out wrong side out to see if you need to hem any of the sides. I had to hem one of the short and one of long sides so the hem would go to the floor. (I did it this way because the ottomans are slightly different and this way they look like the match😉)

Once you have the sides hemmed you’ll pin the corners together keeping the edges even and the slipcover tight all around.

I find it helpful to mark the spot where the seam needs to be on the corners. I use chalk to do this cause it’s easily removed.

Now it’s time to sew the corner seams. Following the pins and the chalk line.

Once your seams are done you can trim the excess fabric from the corners. I usually leave about an inch of fabric outside the seam.

Now it’s time to turn it right side out and put it on! This is such an easy and inexpensive way to update your ottoman you can even make a new one for each season!

Cheap and Easy Headboard Re-do…

I have been wanting to change the slipcover on my headboard for the fall.

I am in love with buffalo check and have been looking at fabric to cover it with. As you know, I am big into using curtain panels or shower curtains as fabric for home decor projects. It’s usually cheaper than buying yardage and its good quality fabric and normally wider too! The easiest thing to cover it with is a shower curtain sewn together! We have a queen size bed and I diy’d the headboard several years ago. The shower curtain is perfect size and is relatively inexpensive. But I haven’t been able to find what I was looking for… so I was grocery shopping the other day, at Meijer, and came across a twin sheet set on clearance in this small buffalo check for $6.

So I snapped it up and thought I would sew a slipcover for it from the flat sheet. But I wanted to try it out first. I draped the sheet over my head board and put on a new gray quilt I had been saving for fall.

Well the quilt had this flat cotton ribbon around it…then the light bulb went off in my head and waalaa with very little effort, a few cuts and safety pins I added the ties to the sides!

Now I have a new headboard cover!

I know it’s a subtle change but I can’t be more happy with it and I have the pillow cases and fitted sheet to spare! Just waiting for that light bulb to go off again!

Bathroom re-do…

Fixer Upper style Farmhouse bathroom reno with faux shiplap

On a whim the other day I decided to ‘paint’ my guest bathroom.  It’s a tiny room so it won’t take long right???? Ha! Of course it took all that weekend and then some! It started out with me using some primer we had on hand to cover the old powder blue paint.

For some reason the primer didn’t really cover very well….

So I made a trip to Menards to get some ‘one coat’ paint.  I told the paint guy what I was up against and he said this paint would do the job in one coat…not so much.  So after one coat of primer and two coats of ‘one coat’ paint the painting was done and so was I for the night…ha!

Now I am a fan of Fixer Upper like so many of you! But I don’t want to hang shiplap everywhere…it seems a little to permanent.  It makes me squeamish thinking of nailing all that wood to my drywall…(maybe because I can remember the paneling from the 70s in everyones homes😫???)  I do like the look of shiplap so I decided to try to fake it!  I used my Cricut to cut thin strips of vinyl to stick to the wall that imitate the seams of shiplap. 😉  I used a dark grey color, I thought black would be too harsh.  So I used my level and a pencil to lightly draw lines on the wall about 6″ apart from floor to ceiling.  Then I started sticking my strips on!  The strips were only 24″ long so it was a lot of strips but, like I said the room is small so it wasn’t so bad.  I overlapped the strips slightly where they met to allow for any expansion/contraction with temperature changes. I am really happy with the way the shiplap turned out!



Well of course I couldn’t stop at paint and ‘shiplap’ I had to have the hubs help me makeover our builder grade medicine cabinet with some added trim and black paint.  I made the light bulb cover out of a placemat 😀

Then we built and  installed some rustic floating shelves above the toilet.  The shelves are made from reclaimed pallet wood and the stain is a vinegar wash.  (I keep cider and/or white vinegar in a ball jar with a wad of steel wool in it for this type of projects.


The cider vinegar gives a more red finish and the white vinegar is more grey.  These shelves I mixed the vinegar about 50/50 to tone down the red a little.)

 

So that quick paint job ended up taking about three weekends to finish but I am over the top happy with way it looks!!!